The raw material of stainless steel bridge is made of stainless steel plates of various materials. In general, no surface treatment is required. The strength and corrosion resistance of bridge frame are much higher than that of ordinary bridge. The following is the classification of stainless steel.

　　不銹鋼表面型

　　Stainless steel surface type

　　現在，隨著不銹鋼的發展，不銹鋼的耐腐蝕性、外觀、加工性能、強度等性能都優于其他材料。并能獲得多種不銹鋼表面處理方法，顏色和顏色豐富多樣，這對不銹鋼的發展做出了巨大的貢獻。

　　Now, with the development of stainless steel, the corrosion resistance, appearance, processing performance, strength and other properties of stainless steel are better than other materials. And can obtain a variety of stainless steel surface treatment methods, color and color rich variety, which has made a great contribution to the development of stainless steel.

　　不銹鋼表面處理制造工藝及機械磨損表面處理方法:

　　Stainless steel surface treatment manufacturing process and mechanical wear surface treatment method:

　　銀白色，無光澤，熱軋至精選厚度。對于退火和脫氧的粗糙、粗糙表面，不需要表面光澤度

　　Silver white, matte, hot rolled to specified thickness. For annealed and deoxidized rough and rough surfaces, no surface gloss is required

　　冷軋后，用2D銀白色進行熱處理和酸洗。有時在更終加工過程中，用輕羊毛邊輥軋制的2D產品用于亞光表面處理、表面松弛、一般材料和深拉拔材料

　　After cold rolling, heat treatment and pickling are carried out with 2D silver white. Sometimes in the final processing, 2D products rolled with light wool edging roller are used for matte surface treatment, surface relaxation, general materials and deep drawing materials

　　經過加工后，拋光輥將完成與輕冷輥，以實現適當?shù)墓鉂?。這是更常見的表面處理，也可以作為拋光的步。普通的材料

　　After processing, the polishing roller will be finished with light cooling roller to achieve proper gloss. This is the most common surface treatment and can also be used as a first step in polishing. Common materials

　　BA就像一面鏡子，沒有標準是明亮的，但通常是輕退火在表面，表面反射是非常高的。建筑材料，廚房用具

　　BA is like a mirror, no standard is bright, but it is usually light annealed on the surface, the surface reflection is very high. Building materials, kitchen utensils

　　3號粗磨2d和NO。在圖2B中，使用了單個100 ~ 200 #(單元)的打磨

　　No. 3 rough grinding 2D and No. In Figure 2B, a single 100 to 200 ? (unit) grinding is used

　　第四，建筑材料和廚房用具。2d和NO。2B，用150 ~ 180號砂帶研磨，研磨用。這很常見，可見的“粒子”

　　Fourth, building materials and kitchen utensils. 2D and No. 2B, use 150 ~ 180 abrasive belt for grinding. This is very common, visible "particles"

　　光的鏡面反射。研磨帶號為240 #顆粒。240廚房用具的精細研磨和砂光

　　The specular reflection of light. The abrasive belt number is 240 × particles. 240 fine grinding and sanding of kitchen utensils

　　320研磨和2,2D不研磨。在圖2B中，使用

　　320 grind and 2,2d no grind. In Figure 2B, use the

　　磨帶光學粉400號320 #400號的光澤接近BA的光澤，用于研磨一般材料、建筑材料和廚房用具

　　The luster of abrasive belt optical powder 400, 320 × 400 is close to that of Ba, which is used for grinding general materials, building materials and kitchen appliances

　　用粒度合適的磨料對HL毛發進行粒度合適的研磨，其成本力是大量的建筑物和建筑物。

　　It costs a lot of buildings and buildings to grind HL hair with appropriate abrasive.

　　以上是濟南電纜橋架廠家小編為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://m.xinheli88.com

　　The above is a brief introduction of Jinan cable bridge manufacturer. If you want to know more, please visit the website: http://m.xinheli88.com